| |
Abstract |
Background
LiDAR is an established technology that is increasingly being used to characterise spatial variation in stand metrics used in forest inventory. As the cost of LiDAR acquisition markedly declines with LiDAR pulse density, it is useful to identify how far pulse density can be reduced without compromising the precision of relationships between LiDAR and stand metrics. Using plot measurements and LiDAR data obtained from highly stocked and unthinned Douglas-fir plantations (Pseudotsuga menziesii [Mirb.] Franco), the objective of this research was to characterise the precision of regressions between LiDAR metrics and stand metrics (mean top height, Hm, volume, V and mean diameter, D) under a range of pulse densities using Digital Terrain Models (DTMs) representing two common scenarios. Under the first scenario, which represents an initial acquisition, the point cloud was sequentially culled and used for creation of a DTM and corresponding LiDAR cloud metrics. In the second scenario, which represents a subsequent acquisition, a DTM generated at high pulse density (10 pulses m−2) was used for the creation of the corresponding LIDAR cloud metrics.
Methods
Models describing the precision of regressions between LiDAR metrics and stand metrics were developed at 10 pulses m−2. LiDAR data were culled to pulse densities ranging from 10 to 0.01 pulses m−2 and the impact of culling on the precision of these regressions was examined under the two scenarios.
Results
For the scenario with the culled DTM, precision of the three models remained stable until densities of 2 – 3 pulses m−2 were reached. Below this threshold, there was a gradual decline in precision to pulse densities of 0.7 – 1 pulses m−2 at which point the R2 was 95% of the maximum values. Further culling of the data resulted in a sharp decline in model precision for all three regressions. For the scenario where the DTM was held at a high pulse density, little change in the precision of the regressions was found until pulse densities of 0.04 to 0.2 pulses m−2 were reached. There was a sharp decline in precision below pulse densities of 0.04 pulses m−2 for all three models.
Conclusion
This study was undertaken in highly stocked unthinned Douglas-fir stands located in areas with complex topography. Consequently, the pulse density thresholds described here are likely to be conservative and could be used to guide acquisition of high-quality LiDAR datasets for this species. |
|
